Chevrolet 2004 Avalanche Owner'S Manual Download Page 217

Page: 217 / 548

Security Light

This light will come on
briefly when you turn the
key toward START.
The light will stay on until
the engine starts.

If the light flashes, the Passlock

system has entered a

tamper mode. If the vehicle fails to start, see Passlock

on page 2-29.

If the light comes on continuously while driving and
stays on, there may be a problem with the Passlock

system. Your vehicle will not be protected by Passlock

and you should see your dealer.

Also, see Content Theft-Deterrent on page 2-27 for
additional information regarding the security light.

Cruise Control Light

The cruise light comes on
whenever you set your
cruise control. See “Cruise
Control” under Turn
Signal/Multifunction Lever
on page 3-8.

Tow/Haul Mode Light

This light is displayed
when the tow/haul mode
has been activated.

For more information, see “Tow/Haul Mode” under
Towing a Trailer on page 4-68.

3-51

Summary of Contents for 2004 Avalanche





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Avalanche

Reviews:

Brands by name

Popular brands

Chevrolet 2004 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2004 Avalanche

Reviews:

Brands by name

Popular brands