Home
/
Chevrolet
/
2004 Astro
/
Owner'S Manual

Chevrolet 2004 Astro, Owner'S Manual, Page: 104 / 382

Share

Page: 104 / 382

Chevrolet 2004 Astro Owner'S Manual Download Page 104

•

Move the lever up as far as it will go.

3. Move the ignition key to LOCK.

4. Remove the key and take it with you. If you can

leave your vehicle with the ignition key in your
hand, your vehicle is in PARK (P).

Leaving Your Vehicle With the Engine
Running

{

CAUTION:

It can be dangerous to leave your vehicle with
the engine running. Your vehicle could move
suddenly if the shift lever is not fully in
PARK (P) with the parking brake firmly set.
And, if you leave the vehicle with the engine
running, it could overheat and even catch fire.
You or others could be injured. Do not leave
your vehicle with the engine running.

If you have to leave your vehicle with the engine
running, be sure your vehicle is in PARK (P) and your
parking brake is firmly set before you leave it. After
you’ve moved the shift lever to PARK (P), hold
the regular brake pedal down. Then, see if you can
move the shift lever away from PARK (P) without first
pulling it toward you. If you can, it means that the
shift lever wasn’t fully locked into PARK (P).

2-26

«
...
102
103
104
105
106
...
»

Summary of Contents for 2004 Astro































































































































































































































































































































































































Reviews:

No comments