manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

2-30

Parking Over Things That Burn

CAUTION:

Things that can burn could touch hot exhaust
parts under your vehicle and ignite. Don’t park
over papers, leaves, dry grass or other things that
can burn.

Engine Exhaust

CAUTION:

Engine exhaust can kill. It contains the gas
carbon monoxide (CO), which you can’t see or
smell. It can cause unconsciousness and death.

You might have exhaust coming in if:
D Your exhaust system sounds strange 

or different.

D Your vehicle gets rusty underneath.

D Your vehicle was damaged in a collision.

D Your vehicle was damaged when driving

over high points on the road or over 
road debris.

D Repairs weren’t done correctly.

D Your vehicle or exhaust system had been

modified improperly.

If you ever suspect exhaust is coming into 
your vehicle:
D Drive it only with all the windows down to

blow out any CO; and

D Have your vehicle fixed immediately.

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

U-Line Big Joe H-4709 Manual preview
Big Joe H-4709
Brand: U-Line Pages: 4
Hard Head 022279 Operating Instructions Manual preview
022279
Brand: Hard Head Pages: 52
Global 989021 Operation, Maintenance, Repair Parts List preview
989021
Brand: Global Pages: 94
Jungheinrich EFX 410 Operating Instructions Manual preview
EFX 410
Brand: Jungheinrich Pages: 404
Datsun 320-U Service Manual preview
320-U
Brand: Datsun Pages: 199
Komatsu HD1500-7 - Brochure preview
HD1500-7 -
Brand: Komatsu Pages: 12
DAF 95XF Maintenance Manual preview
95XF
Brand: DAF Pages: 188
International Trucks ProStar+ Eagle Series. Operator'S Manual preview
ProStar+ Eagle Series.
Brand: International Trucks Pages: 263
Powerfix PTS 2 A1 Operating Instructions Manual preview
PTS 2 A1
Brand: Powerfix Pages: 35
DAF 95XF Manual preview
95XF
Brand: DAF Pages: 312

Brands by name

Popular brands

Load more brands