1997/98 Chevrolet Corvette
Collision Repair
3-27
Rear Compartment Panel
Fig.␣ 3.57 — Frame-Rear Compartment Panel Sectioning
Rear Compartment Panel
Sectioning
The Rear Compartment Panel is manufactured
with section lines to indicate the proper
sectioning location of the service part (see
Fig.␣ 3.54). Check all the bonding areas of the
Rear Compartment Panel (
tub), if adhesive is
cracked or broken loose from the rails or the
‘tub’, complete ‘tub’ replacement is
recommended.
— REMOVE OR DISCONNECT —
1
Visually inspect and restore as much of the
damage as possible to specifications using
three-dimensional measuring procedures.
Notice: The frame rails and bumper impact
bars must be serviced as required, and
returned to three-dimensional coordinates
before any SMC repairs are attempted
(Fig.␣ 3.57).
2
Remove all panels, components, and interior
trim located in the rear compartment. Also,
remove both rear quarter panels and Rear
Compartment Panel Frame (rear surround).
(Refer to Rear Compartment Panel Frame
Service Procedures.)
Notice: Make sure the fuel inlet is sealed
before proceeding with repair procedure.
Important: Save any and all brackets,
mounting studs, and accessories for
transfer to the new rear compartment
panel.