CHESTER GT40001, Manual

Page: 12 / 52

GB
NL
DE
FR
9 TECHNICAL DATA
Rated Voltage AC 230-240V
Rated Frequency 50Hz
Rated Power 2500W (S6, 40%)
Rotation speed 4050Min-1
Max diameter 40mm
Protection class II
Int. protection degree IP24
Collect box 50L
Blade rotation speed 6500Min-1
Cable length 0.35m
Induction motor NO
Silent NO
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
96 dB(A)
Acoustic power level LwA 111 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
11 CLEANING AND MAINTENANCE
To ensure the best performance from the garden shredder, it must be kept clean.
Always clean the garden shredder immediately after use.
Do not allow material to become dry and hard on any of the garden shredder surfaces.
This will directly affect the shredding performance.
Make sure that the inlet chute and the discharge chute are kept clean and clear of all
waste material.
Make sure that all nuts, bolts and screws are tight and secure.
Always have any damaged or worn parts repaired, or replaced by qualified personnel.
Do not use detergents or solvents as these could cause irreparable damage to your
machine. Chemicals can destroy the plastic parts.
Oil the drum every 4th or 5th (use BIO-degradable oil to protect environment).
11.1 Replacement of the cutters (Fig. 5 & Fig. 6)
If the cutters must be replaced, do it always in pairs. Open the shredder, block the cutter disc
with a screwdriver. Using the supplied hex wrench, screw out the socket head screws.
Assemble the new cutters in reverse order.
CAUTION! Do not over tighten the plate adjustment screw and cut
excessive aluminum off of the plate, as this will reduce the life of your
shredder.
Have your garden shredder inspected and maintained by qualified service
personnel. Do not attempt to repair the machine unless you are qualified to
do so.
Before commencing cleaning and maintenance procedures, make sure the garden shredder is
switched off and disconnected from the mains supply. Always wear sturdy leather gloves when
cleaning the cutter blades.
www.chestergarden.be 12