User manuel / Uputstvo za upotrebu
6
For long periods of time during which the clock is not in use, it is
recommended that the batteries are taken out of the compartment.
Two alkaline batteries normally can cover non-stop use of the clock
during approximately 18 months. This clock has extremely low battery
consumption.
2. Switching the clock on/off
To switch the clock on, press the button on the bottom of the
clock. Position “ON“ signifies that the clock is working, while the
position “OFF“ signifies that it is not.
At the beginning of the new game or when selecting another
game mode, there is no need to turn the clock off (explained in
sections 15 and 16).
3. Choosing between programming of the clock and
default modes
When the clock is on and after the initial message (showing clock
model and software version) the display will show symbols “P“ and
“M“ (which is blinking).
If you wish to select a default mode, confirm by pressing the
button
O K
, and if you wish to programme a mode, use the button to
switch to mark “P”, and then confirm by pressing the button
O K
.
4. Selecting a default mode
After you have confirmed that you wish to select one of the
default modes (described in section 3), digits “00“ will start blinking.
Use buttons or to get to the digit signifying the chosen mode,
and then confirm by pressing the button
O K
.
5. Matching colour of chess pieces with clock function
While selecting a default mode or programming any particular
mode, display will show the desired starting time, but it will also show
symbols of white and black pawn blinking together.
White pawn is at the side where at that moment there is clock
lever, ready to be pressed by player playing with white pieces.
