Chery A1 2009, Service Manual, Page: 1013 / 1080

CAUTION:
Even if the entire bonding agent has been cleared, you should also clean the body surface. Do not
touch the glass surface after cleaning.
3. Remove the stopper with a knife.
4. Clean the removed rear window:
•
Clean any bonding agent adhered to the glass with a scraper.
•
Remove the stopper with a knife.
•
Clean the glass with glass cleaner.
NOTE :
Do not touch the glass after cleaning
5. Position the glass:
•
Place the glass in the proper position
•
Make reference marks on the glass and the body
•
Remove the glass
6. Clean the contact surface of the glass:
•
Clear any residue around the peripheral contact face of the glass with glass cleaner.
NOTE :
Do not touch the glass surface after cleaning.
7. Apply a layer of primer M on the contact surface of the body with a brush.
NOTE :
Allow the primer coat to dry for a minimum of 3 minutes. Do not apply the primer to the bonding agent. Do not save
the opened primer M for later use.
8. Apply a layer of primer G on the contact surface of the glass:
•
Apply a layer of primer G on the edges and the contact surface of the glass with a brush or sponge.
•
Wipe the excess primer off with a clean rag before it dries.
NOTE :
Allow the primer coat to dry for a minimum of 3 minutes. Do not apply the primer to the bonding agent. Do not save
the opened primer G for later use.
9. Mixing the bonding agent:
•
Clean a mixing board and a scraper completely with solvent.
•
Thoroughly mix 500 grams of host crystal with 75 grams of hardener on a mixing board with a scraper.
NOTE :
Make sure that the molding is installed within the application period of the bonding agent, and the bonding agent
should be mixed within 5 minutes.
10. Applying the bonding agent:
•
Cut off the pot tip and fill the bonding agent
into the pot.
•
Place the pot into the sealant gun.
•
Apply the bonding agent on the glass as
shown in the figure.
CAUTION:
Verify that the water resistant piece is adhered to the panel of the body as shown in the figure.
STATIONARY GLASS
BESM150017
15–
244
Chery Automobile Co., Ltd.