CHERUBINI Wave Wire, Instructions Manual

Page: 6 / 12

15
KEY TO SYMBOLS
Press the up or down button to raise
the awning
Press the buttons as indicated in rapid sequence and hold the button
down at the step marked by “HOLD”, to check the motor confirmation
movement.
UP
DOWN
HOLD
Press the
UP-button Press the
DOWN-button Press and hold
down the button
Motor
rotation to
confirm
DOWN DOWN
HOLD
UP
2 sec
2 sec
DOWN
UP
?
DOWN
UP
DOWN
UP
?
COMAND SEQUENCES EXAMPLE
Most of the command sequences have three or six distinct steps.
The buttons should be pressed quickly (<0.5 sec) as indicated in the sequence.
The time interval between each step should not be more than 1 second, otherwise the
command sequence will be cancelled.
To receive confirmation that the sequence has been accepted by the motor, the button
must be held down at the final step marked by HOLD.
DOWN DOWN
HOLD
UP
2 sec
Command sequence example in 3 steps:
Attention! If the sequence requires a repetition of the same commands
(Up+Up/Down+Down), an interposition of the Stop position could be necessary
depending on the type of switch in use.
E
NG
L
IS
H