31
OPERATIONAL MODES
Each time the display is activated, the currently set operational mode is indicated on the
SYSTEM STATUS screen. Two operational modes are available:
- Manual
- Automatic
When the remote control is turned on for the first time it is set to manual mode.
Setting the Operational Mode
To change the Operational Mode, perform the following steps from the Main Menu:
Select the item desired and save.
System status - MANUAL
In MANUAL mode, motor management by the brightness and temperature sensors is
deactivated. In this mode, the sensors, if enabled, will in any case show the brightness and
temperature levels in the room, but these do not control motor movement for exceeding
the thresholds.
It is possible to control the motor with just the UP/DOWN/STOP buttons on the remote
control.
System status - AUTOMATIC
In AUTOMATIC mode the brightness and temperature sensors, if enabled, manage motor
movement according to the following table:
E
NG
L
IS
H
Mar 15:22
AUTOMATION
Select
Save
Mode
Manual
Mar 15:22
MAIN
Select
Save
Mode
Manual
Settings
Programming
Automation
Sensors Test
TEST
Mar 15:22
MAIN
Select
Save
Mode
Manual
Settings
Programming
Automation
Sensors Test
TEST
A and C buttons:
to go
from one function list to
the next
B button:
to select the
item desired
LFT button:
returns to
Main Menu without saving
RT button:
saves and
returns to the Programming
screen
