38
COMMAND MANAGEMENT FROM WHITE WIRE
UP-STOP-DOWN-STOP / UP-DOWN / UP-DOWN “DEAD MAN”
NB: The default function provided in the motors leaving the factory is UP-STOP-DOWN-
STOP for singular UP/DOWN button switch. (Not for the switch with two independent
UP-DOWN buttons!)
PROCEDURE TO CHANGE THE CONTROL MODE:
Tn: Already programmed remote control
The possible settings are 3 and are available in the following order:
- UP-STOP-DOWN-STOP (factory setting)
- UP-DOWN (for 2 independent buttons)
- UP-DOWN “DEAD MAN” (for 2 independent buttons)
To switch from one setting to the following, perform the sequence as many times as
necessary to reach the desired setting.
Mode UP-STOP-DOWN-STOP:
Mode UP-DOWN:
Mode UP-DOWN “DEAD MAN”:
Tn
Tn (2 sec)
Tn
+
B
C
B
C
B
C
B
C
B
C
B
B
B
C
C
C
E
NG
L
IS
H
