17
SETTING THE RUGIADA SENSOR
OPERATION
To associate the sensor to a motor, a remote control must be already memorised on the
motor. The setting sequence is the following:
Tn: already programmed remote control
In case of precipitation, the Rugiada sensor sends an alarm signal to the motor. Cherubini
receivers are set at the factory to respond to an alarm signal with a closing command. To
change this setting proceed as follows:
Note: to check proper
memorisation, press the SET
button briefly again: the awning
should move about half way
through its path. When the check
is completed, open the awning
once again.
Tn
Tn
2 sec
SET
BEFORE COMMISSIONING
- Power up the Rugiada sensor.
- Open the awning completely and perform the memorisation procedure below.
2 sec
SET
RESTORE OF THE
CLOSING
MOVEMENT IN THE EVENT OF A RAIN ALARM
ACTIVATION OF THE
OPENING
MOVEMENT IN THE EVENT OF A RAIN ALARM
2 sec
E
NG
L
IS
H
+
A
B
B
C
+
A
B
C
+
B
C
+
A
B
+
A
B
C
Summary of Contents for A520016
Page 11: ......
