background image

8

13.2 Hinweis zum GS-Zeichen

Aufgrund der Position der Nulltaste des numeri-
schen Bereichs ist die Tastatur für Saldiertätigkei-
ten, die überwiegend blind erfolgen, in Deutsch-
land nicht anzuwenden. Eine Tastatur mit nicht-
deutscher Tastenknopfbelegung ist in Deutsch-
land aufgrund der Zeichenbelegung (DIN 2137 
Teil 2) nicht für den Dauereinsatz an Bildschirmar-
beitsplätzen zu verwenden.

13.3 Federal Communications 

Commission (FCC) Radio Frequency 
Interference Statement

Information to the user: This equipment has been 
tested and found to comply with the limits for 
Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference 
in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with 
the instructions, may cause harmful interference to 
radio communications. However, there is no guar-
antee that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which 
can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following mea-
sures:
• Reorientate or relocate the receiving antenna.
• Increase the separation between the equip-

ment and receiver.

• Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is 
connected.

• Consult the dealer or an experienced radio/TV 

technician for help.

Caution: Unauthorized changes or modifications 
could void the authority to operate the equipment.

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions:
• This device may not cause harmful interfer-

ence.

• This device must accept any interference 

received, including interference that may cause 
undesired operation.

13.4 Canadian Radio Interference 

Regulations

Notice of CSA C 108.8 (DOC Jan. 1989)
This digital apparatus does not exceed the Class B 
limits for radio noise emissions from digital appara-
tus set out in the Radio Interference Regulations of 
the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de 
bruits radioélectriques dépassant les limites appli-
cables aux appareils numériques de la classe B 
prescrites dans le Règlement sur le brouillage 
radioélectrique édicté par le ministère des Commu-
nications du Canada.

13.5 VCCI-Statement

Summary of Contents for CyBo@rd Plus M 83-13900

























Reviews: