1224 East Warner Ave,
Santa Ana, Ca 92705
Tel: 1-714-545-5511
www.cherryaerospace.com
TS-H828-8MB Rev: - Date: 5-7-10 CR: 10-0612
H828-8MB
Right Angle Pulling Head for -8 Titanium Maxibolts®
TECHNICAL DATA SHEET
, Page 2 of 2
PREVENTATIVE MAINTENANCE
Inspect active area regularly and keep it clean, in good condition
Clean the insert, jaws and jaw cavity inside the collet every 1,000 installations.
Lubricate outside configuration of the jaws with Lubriplate® or similar light grease.
Use Loctite® 242
(removable) on threaded
components as shown.
At assembly, pay attention
to the orientation of the
pivot pins (items 11); loctite
and tighten the set-screws
(items 15) securely.
PARTS LIST
Note: For “U” type MaxiBolts®
use Nosepiece P/N 837-016.
LOCTITE® is a registered trademark of Henkel Corporation.
LUBRIPLATE® is a registered trademark of Fiske Brothers Refining Co.
18
828B6
BOLT COLLET
1
17
828B15
LINK PLATES (SET OF 4)
3
16
828B3
LEVER
1
15
P-930
SET SCREW
2
14
828B4
BELL CRANK
1
13
828-054
PIVOT PIN
6
12
828B5
DRAWBOLT
1
11
828-053
PIVOT PIN
2
10
642A64
JAM NUT
1
9
828B7
ADAPTER FITTING
1
8
828C2-1
FRAME
1
7
828B11
GUIDE BUTTON
1
6
828A12
COMPRESSION SPRING
1
5
828A10
JAW FOLLOWER
1
4
837-015
JAWS (SET OF 3)
1
3
828C9
COLLET
1
2
828C8
SLEEVE
1
1
837-020
-8MB “S” TYPE
NOSEPIECE (see note)
1
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
PER
ASSY.
WARRANTY
Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and
inspected according to generally accepted practices of companies manufacturing industrial or aerospace
fasteners. In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return
defective goods (after receiving authorization from Seller) for replacement or refund of the purchase price,
at the Seller’s option. Seller agrees to any freight costs in connection with the return of any defective
goods, but any costs relating to removal of the defective or nonconforming goods or installation of
replacement goods shall be Buyer’s responsibility. SELLER’S WARRANTY DOES NOT APPLY WHEN ANY
PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE PRODUCT IS MADE BY BUYER. THE
FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES AND REMEDIES; ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR
MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND EXCLUDED BY SELLER. This warranty
is void if seller is not notified in writing of any rejection of the goods within ninety (90) days after receipt of
the goods by buyer.
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising
in whole or in part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.
Our policy is one of continuous development. Specifications shown in this document may be subject to
changes introduced after publication.
NOTE: The properties, strength, dimensions, installed characteristics and all other information in these
materials are for guidance only to aid in the correct selection
of the products described herein and is not intended or implied as part of the above warranty. All
applications should be evaluated for functional stability and available
samples of the described parts can be requested for installed tests, suitability and evaluations.
For more information please contact our Technical Services Department at tel. 714-850-6022
