SR107 Plus Series
System Components Installation and Removal
│
22
Figure 22
2.5” HDD installation (screw type)
1. Align the front HDD with the anchor point on the tray.
2. Assemble 2.5
”
SSD into the tray by three screws from the bottom as shown.
NOTE:
To ensure proper system airflow requirements, all front drive bays are suggested to populate with a 3.5" drive tray where
it is supposed to be installed with a 3.5” drive, a 2.5” drive with plastic dummy filler or only dummy fillers.
In addition, in order
to support a 2.5
”
drive in a 3.5
”
tray, a screw-type tray is required.
NOTE
: Dedicated screw type is
required for 2.5” SSD Installation, Chenbro P/N: 384
-14602-3143A0.
