3. The Display will show “P ####” where # represents the number of tests currently
stored in memory.
4. Pressing the Down
↓
and Up
↑
key will allow you to select any of the individually
stored test files, each one indicated by a different number.
5. After selecting the file number to be reviewed, press the Enter key to download
that particular file’s data. The Display will show the number of data points that
being downloaded.
NOTE: This will only download to a program that can accept RS232 data. The
accepting program must be set to 9600 baud, 8 data bits, 1 stop bit, and no parity.
DATA STORAGE
The PT-1000 can store test files in the memory or operate without storing test files. The
following procedure describes how to turn the memory storage function on and off.
1. Press the Select key to select the Print menu. The Display will initially show the
“P” mode.
2. Press the Up
↑
to select the “St” storage mode.
3. Press the Enter key to access the Storage mode. The Display will show either,
“St On” or “St OFF”.
4. Pressing the Up
↑
or Down
↓
key will toggle the Display between “St On” and “St
OFF”. When the St On is selected the PT-1000 will store up to 20 individual tests
in files.
DELETING TEST DATA
The storage limit of the PT-1000 memory is 20 tests. When this limit is reached, an
error message, “St FULL” is displayed. It is then necessary to delete test data from the
memory in order to allow additional test data to be stored. Deleting test files before the
memory is full is also accomplished with this procedure.
15 |
P a g e
Probe Tack Tester Operating Instructions (PT-1000)
