REVIEWING TEST DATA
When the Data Storage is turned on, test data is maintained in the memory of the PT-
1000. This data is accessible for reviewing, downloading and deleting. The following
procedures will describe how to review data contained within each test file.
1. Press the Select key to access the Print menu. The Display will show the letter
“P” indicating Print mode.
2. Press the Enter key to access the Print mode.
3. The Display will show “P ####” where # represents the number of tests currently
stored in memory.
4. Pressing the Down
↓
and Up
↑
key will allow you to select any of the individually
stored test files, each one indicated by a different number.
5. After selecting the file number to be reviewed, press the Select key two (2) times
to access that particular file’s data. The Display will change to the “I” or current
force reading.
6. Pressing the Up
↑
key will change the display from “I” to “Average, High, and
then Low.” The numerical values displayed are the test results stored for the
selected test file in the Print mode.
DOWNLOADING TEST DATA
When the Data Storage is turned on, test data can be downloaded to an accepting
program like HyperTerminal through the PT-1000’s RS232 port. The PT-1000 must be
connected to a computer with a RS232 cable. The following procedures will describe
how to download data contained within each test file.
1. Press the Select key to access the Print menu. The Display will show the letter
“P” indicating Print mode.
2. Press the Enter key to access the Print mode.
14 |
P a g e
Probe Tack Tester Operating Instructions (PT-1000)
