Read these instructions thoroughly before use and keep for future
reference.
Important Safety Instructions
When using this appliance, basic precautions should be followed to reduce the
risk of fire, electric shock, and injury to person, including the following:
·
This heater must be used on an AC supply only and the voltage marked on the
heater must correspond to the supply voltage.
·
Do not switch the appliance on until it properly installed as described in this
manual.
·
The heater must not be located immediately below a socket outlet.
·
Do not leave the appliance switched on when leaving your home or going to
sleep.
·
Do not leave unattended when plug in to the mains supply.
·
This heater is not intended for use by children.Never leave unsupervised children
where the heater is left switched ON (I) or unguarded.
·
Only use the appliance for domestic purposes and in the way indicated in these
instructions.
·
From time to time check the cord for damages. Never use the appliance if the
cord or any part of the appliance shows any signs of damage.
·
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
·
WARNING:
In order to avoid overheating, do not cover or obstruct the heater in
any way.
·
Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
·
Make sure the connection cord does not touch any hot surfaces.
·
Keep the appliance at least
100cm (1.0m) from walls and any other combustible
materials.
·
Do not use the appliance outdoors
·
Do not use if you have wet hands.
·
Never move the appliance by pulling the cord.
·
Before cleaning the appliance, make sure it is unplugged from the mains power
and that it is completely cool
·
Do not clean the appliance with abrasive or chemicals.
·
Never use accessories that are not recommended or supplied by the manufacturer.
·
Never route the mains cable beneath carpet.
·
Never use aerosols or similar close to the heater.