- Do not move the fireplace in use.
- Do not block the air vents of the fireplace. Do not insert objects into the ventilation or air vents. This can cause electric
shock or damage to the fireplace.
- Do not let the fireplace started when no one in the room.
- Do not immerse in water or fire in another liquid.
- Do not lift the front of the fireplace, as this one being interchangeable, the fireplace may fall and cause injury or property
damage.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance
by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Installation in the case of a fireplace Chemin'Arte, set high on a wall:
- Open the box carefully, avoiding scratching the surface with a sharp object.
- Take your fireplace Chemin'Arte its packaging and remove the protective packaging: cartons, plastic contact,
packaging materials, plastic protection.
- The power cord must be connected to a junction box wall for this purpose.
- The connection must be made within the rules of art. If you have any doubts, consult an electrician. For information, the
brown wire must be connected to the phase, neutral and blue to green and yellow earth.
- The fireplace must not be below a socket.
- Most models Chemin'Arte can be fixed against a wall. A mounting bracket is supplied with your fireplace Chemin'Arte.
Because of the many types of walls and installation should be chosen in a specialty store setting appropriate (ankles,
plasterboard screws, etc.)..
- Determine the height you want to install your fireplace Chemin'Arte (usually over 40 cm above the ground) and then
attach the bracket using the appropriate tools.
- Once installed the fireplace wall, place the pebbles or decorative accessories on the central rail and then to the front
panel, making sure it is securely attached to the central body of the fireplace (2 persons are needed for this operation ).
- Council team Chemin'Arte:
To be on that once installed, your fireplace will be perfectly straight, use a spirit level when
installing the bracket.
Include in the carton:
Using the remote :
Power
－
Press to start the fireplace
Heater
－
Press once to get the ventilation, press again to get the 1000W heater and a thrif time to get the 2000W heater
Flame
－
Press once to get the flame. Press again to modify the flame brightness (3 levels)