www.chemetrics.com
4295 Catlett Road, Midland, VA 22728 U.S.A.
Phone: (800) 356-3072; Fax: (540) 788-4856
E-Mail: [email protected]
Sept. 14, Rev. 1
Menu Selection
1. Hold the Mode key down and press the On/Off key. Allow the 3 decimal points
to appear in the display before releasing the Mode key.
2. Use the
!
key to toggle through 2 menu options:
Store = recall stored data
Date & Time = setting the date and time.
3. Press the Mode key to select the menu option that is indicated by the arrow.
Note:
If the instrument is already on, press and hold the
!
key for more than
4 seconds to access the recall menu.
Recall of Stored Data
The colorimeter shows the last 16 data sets in the following format:
Sample Number: nXX (XX: 16, 15, 14, ....1)
Year: XXXX (e.g. 2009)
Date: mm.dd (e.g. 07.31)
Time: hh:mm (e.g. 12:05)
Result: XX or XXX
The Zero/Test key repeats the current data set.
The Mode key scrolls through all stored data.
Quit the menu by pressing the
!
key.
Setting Date and Time
The setting starts with the year (XXXX), then month (XX), then day (XX), then
hour (XX), then minutes (XX).
Increase value by pressing the Mode key.
Decrease value by pressing the Zero/Test key.
Proceed to the next setting by pressing the
!
key.
After setting the minutes and pressing the
!
key, the display will show "IS SET"
and return to measurement mode.