11
Maintenance instructions
Section 7B
Carbon filter replacement:
Carbon filter is an optional component produced with the purpose of using the range hood without
flue connection. If you want to use the product without flue connection, a carbon filter must be
purchased from the authorized technical services.
Figure A12
Figure A11
Figure A1
0
Carbon filter removal:
1-Unplug the range hood or turn off the fuse switch.
2-Remove the aluminium filter in order to reach to the carbon filter.
3- Turn the carbon filter in anti-clockwise direction and remove by pulling to the side as
shown in Figure A11.
Carbon filter placement
;
Turn the carbon filter in the clockwise direction by pressing on the side as shown in Figure A12.
Cleaning:
-
Use a wet cloth with liquid detergent in order to clean the external surface of the range hood.
Do not use corrosive and abrasive cleaning agents.
Caution:
-
You may cause fire if you do not follow the rules on filter cleaning and replacement.
Warning:
-
Suction performance will be reduced by 30% to 40% when carbon filter is used.
-
Carbon filter should not be washed. It should be replaced once in 4 months under normal
conditions.
-
There is a risk of fire if the oil filters are not cleaned regularly and if the carbon filter is not
replaced at the end of its service life (approximately 4 months).
