Electric Induction hobs Chef’sEH-DIH888/ EH-DIH888P
19
12. Operating thetimer
12.1 Basics
The timer module contains up to 3 timers. 2 timer which can be assigned for the
cooking zones and 1 independent timer called “egg-timer”. The three 7-segment
displays show the remaining time until the alarm isactivated.
All timers work as count down timers. The operation range is between 1 min to 1h
59min.
For remaining times less than 9min 59sec the display is exact to the second.
Before activating a timer the control has to be switched on. Switching the control off
deactivates cooking zone relatedtimers.
The “egg timer” stays active after switching the controloff
.
Fig.9: Three timer supported forhob
Audible signal with timing, two cooking zones are invidiually programmable cooking
zone-Timer from 0 to 1.59hours.
In order to assure clear assignment of the actual displayed remaining time to a
cooking zone, each cooking zone has a luminous symbol which is fully lighted when the
timer for this cooking zone is displayed in the 3 digit 7-segmentdisplay.
If the timer of a cooking zones is not active the symbol is inactive. If a cooking zone
timer is active but not displayed on the 3 digit 7-segment display the luminous symbol
is illuminated half (dimmed). Alternatively this differentiation can also be done using
flashing or static luminoussymbols.
12.2 Activating Cooking ZoneTimer
A Timer can be activated for each active cooking zone. After selecting the timer by
press simultaneously 2 timer+ and timer– keys ( first time), the cooking zone ( left zone)
Timer is selected and related luminous symbol is fully lighted. The timer display shows
“0.00”.
