CHEFOOK CHCV390, Instruction Manual

Page: 10 / 83

9 P2M062STD-Ver1.0
GB
Operation
Temperature setting and control (CAREL)
The front panel of the thermostat
1.
Machine On/Stand -by (keep pushed)
2. Programming key (service agent only)
3. Manual defrost (keep pushed)
4. Defrosting light
5. Compressor operation light
How to turn the machine in ON / STAND -BY status

Press and hold the key for 3s, the machine will turn from ON to STAND -BY status and vice-versa.
How to unlock the keyboard (»Loc» message)

Push button for more than 3s, «PS» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 60s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point

Push and immediately release the key, the set point will be showed and starts blinking;

To change the set value push or arrows within 20s.

To memorize the new set point value push the key again or wait 20s.
Automatic defrost

The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:

Press and hold the and button for 3s;

The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.