4
Troubleshooting
Fault
Possible Cause
Solution
Buffet Warmer not working
The unit is not switched
on
The plug or lead are
damaged
The fuse has blown
Internal wiring fault
Check the unit is plugged in
and switched on
Contact your Chefmaster
distributor
Replace the fuse
Contact your Chefmaster
distributor
Infrared Lamp is not on
The bulbs are not
switched on
The bulbs are not
installed properly
The bulbs are burnt out
Check the unit is plugged in
and turn on the lamp with
switch buttons
Switch off the product, then
tighten the bulbs clockwise
& switch on again
Contact your Chefmaster
distributor
Transportation and Storage
Please handle your Buffet Warmer with care to prevent any damage to the unit
and internal parts. The Buffet Warmer should be stored somewhere which is
ventilated and has non-corrosive gas.
Do not store any flammable objects near the equipment.
Technical Information
HED240
– Buffet Warmer
Voltage ~230v, 50/60Hz
Power 1000watt
Dimension 730 x 580 x 550mm
Weight 14kg
Chefmaster Buffet Warmer is supplied with a 3 pin plug and lead with a
13 amp fuse
Appliance must be earthed
If in doubt contact a qualified electrician or your Chefmaster distributor
