9
•
When cooking program finish, the oven will enter End of Cook Cycle
Mode. If you press "
" button under this mode, the oven will enter
Pause Mode.
10. On the Fly Cooking
•
While the oven is cooking or under Pause Mode, if User Option OP:51
is selected, press number buttons, the preset cooking program will
start automatically.
•
LED displays the remaining cooking time.
•
When cooking program finish, the oven will enter End of Cook Cycle
Mode. If you press "
" button under this mode, the oven will enter
Pause Mode.
11. Programming Mode
This mode allows the user to assign cook times and power levels to the once
touch button.
•
Open the door and press "1" for 5 seconds, the buzzer will sound once
and enter to Programming Mode.
•
"ProG" displays.
•
Press any number, 0 to 9, and the LED will display the saved time,
then you can input the time you need.
•
Press
to input the power level. LED
will display the related power. If the same button pressed twice, the
power will change to PL10. If no power chosen, "PL10" is default.
•
To change the cooking factors: If press "X2", LED will display "CF:XX".
The default factor is 80%. "CF:80" displays. If you need to change the
cooking power, just press one of the number buttons to set.
•
After setting the time and power, press "
" in 30s, the cooking
program will be saved. When the program saved, "ProG" displays.
•
If all the cooking time exceeds the MAX. time User Option 7, when
press "
" to save the program, the buzzer will sound three times
briefly to tell you the time is no use. And then LED turns back to show
"ProG". The time set before will have no change.
