USA
7
AFTER SALES SUPPORT
888-315-8407
MODEL: RJ27
DO’ & DON’TS WHEN USING YOUR BLENDER
DO:
• Make sure the electrical outlet is rated at the same voltage as that stated on the
bottom of the blender motor base.
• Always use the blender on a clean, sturdy and dry surface.
• Always add liquid ingredients to the blender jar first, then add remaining
ingredients. This will ensure that ingredients are uniformly mixed.
• Cut most foods into cubes approximately
½-
inch (1.3 cm) to 1 inch (2.5 cm) to
achieve a more uniform result. Cut all cheeses into pieces no larger than
½-
inch
(1.3 cm).
• Use the measuring filler cap to measure liquid ingredients such as alcohol.
Replace the measuring filler cap after ingredients have been added.
• Use a rubber or plastic spatula as needed, only when the blender is turned off.
Never use metal utensils, as damage may occur to the blender jar or cutting
assembly.
• Place cover on firmly. Always operate the blender with the cover on.
• Make sure locking ring is tightly attached to blender jar.
• Always remove locking ring, cutting assembly, and rubber gasket before cleaning
• When scraping the blender jar with a spatula, remove the food from the sides of
the blender jar and place food in the center of the blender jar, over the cutting
assembly.
• When chopping fresh herbs, garlic, onion, zest, bread crumbs, nuts, spices, etc.,
make sure the blender jar and cutting assembly are completely dry.
• If food tends to stick to the sides of the blender jar when blending, pulse in short
bursts.
• Pulses should be short bursts. Space the pulses so the blades stop rotating
between pulses.
Operating Instructions (cont'd)
Summary of Contents for RJ27
Page 2: ......
Page 16: ...888 315 8407 customerwarranty rjbrands com MODEL RJ27...
