6. Double-Check Installation and Remove Support
Be sure that the hood is securely attached before removing
the cabinet jacks and plywood.
7. Connect Damper & Check for Airtightness
Turn on the hood to make sure that the damper opens and
closes freely. This will ensure better and quieter performance.
Loosen the screw on the side of the adapter, then insert the
duct into the adapter and tighten the screw to lock in its
position. Make sure the duct is firmly attached to the adapter
and wrap the joint with aluminum foil tape to make it air tight.
IMPORTANT:
Be careful when connecting the vent pipe to
the adapter. Excessive force might dislodge the damper and
fell into the house, which may damage the motor.
9. Reinstall Bottom Cover, Panel Filter and Grease
Collector
Using the 3 screws you removed earlier, reinstall the
bottom cover. Then, reinstall the panel filter by aligning
the holes to the bracket in the rear of the hood. After the
panel filter is secured by the brackets, lift it up to put it
back in place.
10. Keep This Manual
Put this manual in a safe place and keep for further
reference.
8. Plug the Range Hood In
Plug the power cable into an outlet.
UC-PS38 USER MANUAL
8
The UC-PS38 range hood is very simple to use and is operated
entirely using the front control panel.
Using the Front Control Panel
Use the front control panel to adjust your range hood’s
settings and to turn it on/off.
1
- ON/OFF
2
- LIGHT
3
- DOWN
4
- UP
5
- STEAM AUTO CLEAN
How to Use Your Range Hood
1
2
3
4
5
How to Turn Light On/Off
This range hood has a single light setting. Press the lightbulb
button (2) to turn the light on or off.
CAUTION:
For halogen lamps never touch bulbs during
operation; they can get very hot.
How to Set the Fan Speed
Press the on/off button (1) to turn the range hood on. To
increase/decrease fan speed, use the up/down arrows (3 & 4)
to find your desired fan speed.
