Chef CHE654SC, User Manual

Page: 3 / 16

each use. Do not rely on the pan
Set the cooking zone to “off” after
•
• The electrical mains terminal is live.
separate remote-control system to
Do not use an external timer or a
Installation instructions
Before the installation , note down
the serial number (Ser. Nr.) from the
rating plate.
The rating plate of the
appliance is on its lower casing.
PNC: 949163195
Made in China Model: CHE654S
APP NO.: 55GADE8AU
AU APP NO.: S/91
S NO.:
50Hz 6.9 KW
220 - 240 V AC
~ 220 - 240 V
PNC: 949163202
Made in China Model: CHE655S
APP NO.: 55 GAD EC AU
AU APP NO.: S/91
S NO.:
50Hz 6.9 KW
220 - 240 V AC
~ 220 - 240 V
The Safety Instructions
Warning! You must read these!
• Make sure that the appliance is not dam-
aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Only an authorized servicing technician
can install, connect or repair this appli-
ance. Use only original spare parts.
• Only use the built-in appliances after you
assemble the appliance into correct built-
in units and work surfaces that align to
the standards.
• Do not change the specifications or
change this product. Risk of injury and
damage to the appliance.
• Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, electri-
cal safety rules etc.)!
• Keep the minimum distances to other ap-
pliances and units!
• Install shock protection, for example in-
stall the drawers only with a protective
floor directly below the appliance!
• Keep safe the cut surfaces of the work-
top from moisture with a correct sealant!
• Seal the appliance to the work top with
no space between with a correct sealant!
• Keep safe the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
• Do not install the appliance adjacent to
doors and below windows! If not, when
you open the doors or windows they can
push off hot cookware from the appli-
ance.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• Make electrical mains terminal free of
voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket
connections can make the terminal be-
come too hot.
• A qualified electrician must install the
connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin-
gle phase or two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak to your local Service
Centre.
The appliance must have the electrical in-
stallation which lets you disconnect the ap-
pliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct devices to isolate:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leak-
age trips and contactors.
3
operate the appliance.
detector
•
PNC: 94916314
Made in China Model: EHC65 U
APP NO.: 55 GAD EC AU
AU APP NO.: S/91
S NO.:
50Hz 6.9 KW
220 - 240 V AC
~ 220 - 240 V
7
7