background image

Foreword

Thanks for your purchase of this XT32C wireless power-control flash trigger.

This flash trigger applies to Canon cameras. It can also directly control flashes which have 

built-in Godox wireless X system (e.g. TT685 series, V860II series, AD360II series, AD600 

series, QuickerII series, etc.). As to the flashes which do not have Godox wireless X system 

but have USB wireless control port (e.g.V860 series, V850, AD360, QT series, SK series, 

etc.), a XTR-16 or XTR-16S receiver can be used in combination to achieve power 

adjustment and triggering. Featuring multi-channel triggering, stable signal transmission, 

and sensitive reaction, it gives photographers unparalleled flexibility and control over their 

strobist setups. XT32C can also connect to the cameras which have PC sync sockets. It 

supports high-speed sync function and the max flash synchronization speed is up to 

1/8000s *. 

 

*: 1/8000s is achievable when the camera has a max camera shutter speed of 1/8000s. .

- 15 -

For Your Safety

- 16 -

To prevent damage to your product or injury to you or to others, read the following safety 

precautions in their entirety before using this device. Keep these safety instructions where 

all those who use this device will read them.

Failure to observe the precautions listed in this section could result in damage to the 

product. 

The following icon indicates warnings that should be read before using this device in case 

of possible damage or injury.

       Do not disassemble or modify

       Failure to observe this precaution could result in electric shock or product malfunction.        

       Should the product break open as the result of a fall or other accident, remove the 

       batteries and take the product to an authorized maintenance center for inspection.

Keep dry

Do not handle with wet hands or immerse in or expose to water or rain. Failure to 

observe this precaution could result in fire or electric shock.

Do not use in the presence of flammable gas

Failure to observe this precaution could result in explosion or fire.

Keep out of reach of children

This device contains small parts which may pose a choking hazard. Consult a 

physician immediately if a child swallows any part of this device.

Turn off the transceiver immediately in the event of malfunction

Should smoke or an unusual smell comes from this device, remove the batteries 

immediately in case of burning and take the device to an authorized maintenance 

center for inspection. Injuries could occur if it is further used.

Do not expose to high temperature

Do not leave the device in a closed vehicle in the sun or in other areas subject to 

Summary of Contents for XT32C










Reviews: