C
HEETAH
64
S
ERIES
–
C
HAPTER
10
81-9059-0577-0
Rev. E
Proprietary Information of
PESA Switching Systems
10-1
Chapter 10 A
PPENDICES
This section is subdivided into the following topics:
•
Appendix A: Ethernet Configuration
•
Appendix B: SNMP
•
Appendix C: PESA Matrix Frame Controller Debug Port Protocol
•
Appendix D: Abbreviations, Acronyms, and Definitions (AA&D)
10.1
A
PPENDIX
A:
E
THERNET
C
ONFIGURATION
The Matrix Frame Controller supports a variety of interfaces via the Ethernet interface. These
include NET PRC, HTTP (HyperText Transfer Protocol - web), SNMP (Simple Network
Management Protocol), and Telnet. To configure this access, the following items will need to be
configured (refer to Table 10-1):
The network server automatically assigns the IP Address, Subnet Mask
specification, and Gateway specification when the Dynamic Host
Configuration Protocol (DHCP) is enabled.
T
ABLE
10-1
Ethernet Configuration
N
AME
U
SAGE
D
EFAULT
DHCP On/Off
Automatically obtain an IP address from
a (DHCP) server on the network.
On
IP Address
When DHCP is disabled, allows a fixed
IP address to be assigned to the Matrix
Frame Controller.
0.0.0.0
Subnet Mask
When DHCP is disabled, allows the
specification of the subnet mask for the
IP address.
0.0.0.0
Gateway
When DHCP is disabled, allows the
specification on the default gateway.
0.0.0.0
Telnet On/Off
Enables or disables the Telnet server.
On
Telnet Port
Allows the specification of the TCP port
to be used by the Telnet server.
23
Telnet Password
Specifies the password for telnet access.
<blank>
NETPRC Master/Slave
Enables or disables the NETPRC server.
Note that the SNMP agent is disabled in
Slave mode.
Slave
Table Continued on next page
Summary of Contents for 64NE
Page 108: ......
