C
HEETAH
64
S
ERIES
–
C
HAPTER
6
81-9059-0577-0
Rev. E
Proprietary Information of
PESA Switching Systems
6-4
6.3.1.2
Cheetah 64 Series Chassis AC External Power Requirements
The 64x64 and 64x128 chassis are supplied with redundant, prefabricated, UL/CSA approved
power cords that include a NEMA 5-15P male and IEC-60320-C13 female line connectors.
These cords are for connection to a 120VAC-supply service (refer to Table 6-1).
T
ABLE
6-1
AC Power Connectors
AC Power Cable
Minimum Amps
Required
IEC
Pigtail
Service Drops
IEC-type line cord (120VAC connectors)
10A Service
Yes
No
1-Standard
1-Redundant
This AC power filter assembly has been designed for 95-240VAC, which
includes connectors and cords specified to handle maximum power
requirements.
6.3.2
Cheetah Chassis International Power Requirements
All Cheetah frames have two AC Main power feeds, which are isolated from each another. All
international power requirements are pre-configured at the factory and commercially available,
prefabricated power cords designed for the power source that the equipment will be operating are
supplied with each unit.
As in the United States, international operation with one power supply is the normal, non-option
condition. An optional second (redundant/backup) power supply is available. Typical full-frame
power consumption is approximately 6.0 Amps or approximately 650 Watts at 240 VAC nominal
regardless of the number of power supplies in use.
Summary of Contents for 64NE
Page 108: ......
