Quick Start Guide: Counterpoint iD
Page 7 of 7
Figure 4: PSU DC Cord Strain Relief
4. Configure the DIP Switches on the front panel for the desired operation.
Note: For details on “Mode Configurations”, see
5. System is ready to power ON. With no advanced features required, the final step is
to press Reset button, wait for the Violet LED, then press reset again to tune.
6.
Optional:
Connect field service laptop to front RS-232 port via patch cable, then
perform any FW upgrades or advanced tuning with DMS. See Help File for more.
Tuning
CPiD needs to be tuned upon installation or it will not function.
Using DMS SW features (see below), advanced antenna tuning may help
achieve desired detection, but keep in mind:
• Avoid interactions when located near EAS pedestal/antennas.
• Tune system for immunity/ False Alarms for the detector.
See Also
DMS version 1.8.95 and later will feature a help file to cover all SW-based
configurations and settings for using CPiD. To access the instructions, click
Help (or press F1) > Help Files > Counterpoint ID.
