7
4. Close the riser latch.
Reassembling the Appliance
Make sure that all internal cables are routed correctly and connected, and no tools or extra parts are left
inside the appliance.
To reassemble the appliance:
1. Align the tabs on the cover with the guide slots on the appliance (1).
2. Close the system cover release latch (2).
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, turn the lock clockwise to the lock position (3).
4. Install the appliances into the rack. See the
Smart-1 625 Installing the Telescopic Rails Guide
.
5. If you have transceivers for your expansion line cards, install them now. See
Installing a Transceiver
.
If not, install them later.
6. Connect the power cables from the AC PSUs.
