Registration and Support
Quantum Smart-1 600-M Appliances Getting Started Guide | 23
Registration and Support
Registration
The appliance requires a product-specific Check Point license. Get a license and register at the Check
Point
The MAC address of the Management Interface is required to obtain a license.
To find the MAC address of the Management Interface in Gaia Clish:
1.
Connect to the command line on the appliance - over SSH, or console.
2.
Log in to the Gaia Clish with the administrator username and password.
3.
Get the name of the Management Interface:
show management interface
4.
Get the MAC Address of the Management Interface:
show interface
<Name_of_MGMT_interface
> mac-addr
5.
Copy the MAC address from the screen.
To find the MAC address of the Management Interface in Gaia Portal:
1.
In your web browser, connect to the management IP address:
https://<
appliance_ip_
address
>
2.
Log in to the Gaia Portal of the appliance with the administrator username and password.
3.
In the top left corner, in the
View mode
field, select
Advanced
.
4.
In the left navigation tree, click
Network Manament > Network Interfaces
.
5.
The
Management Interface
section at the bottom shows the name of the Management Interface.
6.
In the
Interfaces
section at the top, select the Management Interface.
7.
From the toolbar, click
Edit
.
8.
In the caution pop-up window, click
OK
:
You are about to change the settings of an interface you are
connected to.
Click OK to proceed, Cancel to return.
9.
Click the
Ethernet
tab.
10.
Copy the MAC address from the
Hardware Address
field.
11.
Click
Cancel
.
