
TE250XN
Rack Mounting for Check Point Appliances | 18
Item
Description
1
Inner rack rail
2
Release latch
3
Outer appliance rail
Legend
To install the inner appliance rails to the appliance:
1. Place the appliance rail on the side of the appliance and make sure:
n
The release latch is facing away from the appliance
n
The arrow on the release latch points to the front of the appliance
n
The appliance rail extends past the back panel of the appliance
2. Install the appliance rails to the side of the appliance with the provided screws.
Note - Do not overtighten the screws. Check Point recommends that you leave
the rail mounting screws loose until the server is completely installed. This eases
installation by preventing binding of the server in the rack.
3. Do steps 1 and 2 again to install the appliance rail on the other side of the appliance.