Check Point Pointsec PC, Installation Manual

Page: 21 / 44

Review precheck.txt
Chapter 1 Before You Install Pointsec PC 15
GINA Settings
You can set the following Graphical Identification and Authentication
(GINA) options:
KeyImportMethod=
This setting specifies how the imported random data will be
processed when using it to make keys.
Combine = Partition keys are generated by combining the
imported random data with random data generated by
Pointsec PC. Data used to protect partition keys is generated
by combining partition keys with random data generated by
Pointsec PC.
‘Combine’ is the default: if nothing is specified for this
setting, the ‘Combine’ method will be used.
Direct = The imported random data is used ‘as is’ as a
partition key. Data used to protect partition keys is generated
by combining partition keys with random data generated by
Pointsec PC.
You cannot use the key import directory’s
PWD.DAT
file when
using the ‘Direct’ method.
Table 1-1 General Settings
Setting Description
Table 1-2 Gina settings
Setting Description
CompatibleGinas=
Here you can enter the names of compatible Graphical Identification
and Authentication (GINA) dlls, separated by semi-colons (;), e.g.
CompatibleGinas=xx1.dll; xx2.dll; xx3.dll
No value specified is the default. Enter the names of GINAs that you
would like Pointsec PC to attempt to perform SSO to.
Note: The GINAs may not actually be compatible with Pointsec PC
Single Sign-on (SSO).
SmartCardDlls=
Here you can enter the preferred smart card dll order, separated by
semi-colons (;), e.g.
SmartCardDlls=xx1.dll; xx2.dll; xx3.dll
No value specified is the default. Specify which dll files the system
should use with smart cards.