Check Point MAESTRO R80.20SP, Administration Manual

Page: 27 / 228

Managing Security Groups
Check Point Maestro R80.20SP Administration Guide | 27
Parameters
Parameter Description
collect Collects the Security Gateway debug information.
view
Shows the collected debug information.
< debug_file_path >
Specifies the full path of the debug file.
-buf < buf_size > Specifies the debug buffer size.
Always set the maximal size 8200.
-m < debug_module_
1 >
< debug_flags_1 >
[-m < debug_module_
2 >
< debug_flags_2 >]
...
[-m < debug_module_
N >
< debug_flags_N >]
Specifies Security Gateway debug modules and debug flags in those
modules.
You can specify more than one debug module.
-o < agg_file_path >
Uses an aggregate debug file.
< agg_file_path >
- Full path of the aggregate debug file.
Below are some examples:
Example - Collect debug information
> fw dbgfile collect -f /var/log/debug.txt -buf 8200 -m fw + conn -m kiss + pmdump
Example - Show the collected debug information
> fw dbgfile view /var/log/debug.txt
Important
- For complete debug procedure, see the
R80.20SP Maestro Next
Generation Security Gateway Guide
- Chapter
Kernel Debug on Security Groups
.
fwaccel, fwaccel6
Description
The
fwaccel
commands control the acceleration for IPv4 traffic.
The
fwaccel6
commands control the acceleration for IPv6 traffic.
When you run the
fwaccel
and
fwaccel6
commands in Gaia gClish, they show combined
information from all Security Appliances, for most parameters.