Check Point L-71, Administration Manual

Page: 8 / 124

Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 8
CHAPTER 2
Installation
In This Section:
Setting Up the Check Point Appliance .................................................................... 8
Connecting the Cables ........................................................................................... 8
About the PoE ........................................................................................................ 9
Deployment Types ................................................................................................. 9
Predefining a Centrally Managed Deployment ........................................................ 9
Small-scale Deployment Installation ................................................................... 10
Large-scale Deployment Installation ................................................................... 22
Setting Up the Check Point Appliance
1. Remove the Check Point Appliance from the shipping carton and place it on a tabletop.
2. Identity the network interface marked as LAN1. This interface is preconfigured with the IP
address 192.168.1.1.
Connecting the Cables
1. Connect the power supply unit to the appliance and to a power outlet.
The appliance is turned on when the power supply unit is connected to an outlet.
The Power LED on the front panel lights up. This indicates that the appliance is turned on.
The Alert LED on the front panel starts to blink. This indicates that the appliance is booting up.
When the Alert LED turns off, the appliance is ready for login.
2. Connect the standard network cable to the LAN1 port on the appliance and to the network
adapter on your PC.
3.
If you use an external modem:
Connect the Ethernet cable to the WAN port on the appliance back panel and plug it into your
external modem or router’s PC/LAN network port. The WAN Link LED on the appliance front
panel lights up when the Ethernet is connected.
4. If you do not use an external modem:
Connect the telephone cable to the DSL port on the appliance back panel and plug it into the
DSL line socket. The DSL Link LED as well as the Internet Link LED remains off until you
configure the appliance, including setting up the DSL as an internet connection.