Integrity Advanced Server Installation Guide
18
Completing the installation
When the installation is complete, you will be given the option of starting the services
and launching the Administrator Console. (This option is only available in the Windows
Installer). You can launch the Administrator Console at any time by entering the
Administrator Console URL in a supported browser: http://<Integrity Advanced Server
IP Address>/signon.do.
Configuring the RADIUS Server
The Integrity Advanced Server is configured by default to use its own administrator
authentication method. If you wish to use a RADIUS server instead you will need to
configure it now.
Prerequisites
Before beginning to configure your RADIUS server, make sure you have done the
following:
Record the RADIUS server host name or IP address and port (default port is
1812).
Record your RADIUS server shared secret.
Create an Integrity Advanced Server account, called “masteradmin” on the
RADIUS server.
If you are migrating data from a 5.x version of Integrity Advanced Server, you
should log into the Administrator console and complete the migration before
making changes to the configuration file.
To configure the RADIUS server:
Perform the following steps to configure the RADIUS server. Configuration consists of
updating a configuration file and a properties file. If you are using clustering, you will
have to update these files on one computer and then transfer them to the other
computers in the cluster.
1. Update the configuration file.
See “
Updating the configuration file,”
on page
19
.
The default login for the Integrity Advanced Server is ‘masteradmin’ and the default
password is ‘password’. If you are using RADIUS authentication, enter the password
you used for the RADIUS server for this account. You will be prompted to change
your password the first time you log in.
Integrity prompts you to change your password periodically. Passwords must be at
least six characters long.