Introduction
26000 and 28000 Appliances Getting Started Guide | 35
Initial Configuration
Configure the appliance with the First Time Configuration Wizard. See the
Installation and Upgrade Guide
related to the software version.
Go to the
Installing Security Gateways on Appliances
section, and see the instructions to use the First
Time Configuration Wizard.
Creating the Network Object
Configure a Security Gateway object on the Management Server:
1.
Connect with SmartConsole to the Management Server.
2.
Configure a new Security Gateway object for the appliance.
3.
Enter the IP address for the appliance.
4.
Create Secure Internal Communication (SIC) between the Security Gateway and the Management
Server. Enter the activation key you used in the First Time Configuration Wizard.
5.
Configure the topology.
6.
Configure and install the Security Policy.
