– 18 –
8.1 Setting the Memory Mode
1. Turn the
POWER
off.
2. Press
PEAK
and hold, then press and release
POWER
.
The display will show the HI Comparator limit
3. Press
PEAK
twice to display the current memory mode.
4. Press
UNIT
to cycle the Memory mode
5. Press
MEM
to save and exit.
The following items are found in the Comparator/Memory mode settings.
Setting
Display
Content
Default Factory Setting
Comparator HI limit
HI
Current HI limit
0
Comparator LO limit
LO
Current LO limit
0
Memory Mode
MEM
Current Memory Mode
Std
– 19 –
PEAK
PEAK
PEAK
MEM
UNIT
UNIT
UNIT
PEAKPEAK
PEAKPEAK
PEAKPEAK
MEMORY
MEMORY
UNITUNIT
UNITUNIT
UNITUNIT
Setting the Memory Mode
8.2 Recording Memory Data
The following procedures explain how to activate memory recording for
each memory mode
Continuous Mode:
1. In the Continuous Measurement Mode, Pres
s MEM
to start recording.
The letter
M
will appear and start blinking. Press
M
to stop recording.
2. If 1000 points of data are recorded, the display will show
FULL
and
return to standard measurement mode.
