12
TEXDRIVE
TEXDRIVE - DT
21.0 - DISTRIBUTOR HALF-CUP OPENING
According to the type of plant and speed of rotation, the plants descending from the
distributor (fig. 14) may hit the mouth of the dropping tube (fig. 14.A) sideways on,
resulting in a drop which is not straight.
To correct this situation adjust the opening lever (fig. 14.B) by turning the screws
(fig. 14.C) until the plants drop down the centre of the tube (fig. 14.A).
-turn clockwise to DELAY
-turn anticlockwise to ADVANCE
Secure the screws properly (fig. 14.C).
22.0 - TRANSPLANT DISTANCE
INTER-ROW SPACING: minimum 50 cm for single frame version (fig. 15)
minimum 25 cm for double frame version (DT) (fig. 16)
Inter-row spacing must be adjusted with the machine coupled to the tractor and with
the lift unit lowered.
Clean the hexagonal axis and the frame of any soil or other dirt, slacken the screws
(fig. 17.A), position the unit at the desired distance, sliding it along the frame. Do not
carry out these operations by hammering with metal objects as this could cause
serious damage to the components.
FIG. 17
A
A
FIG. 14
TEXDRIVE-DT
B
A
NO
OK
A
A
C
FIG. 16
min. 25
FIG. 15
min. 50
TEXDRIVE
