TR2-KBD
MIDI Interface for Korg Trident Keyboard
Model 8-436 ver. 1.0
Copyright © 2018 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
9
d) Flip “Key Assigner“ board back to its original position. Be sure that flat cable isn’t clawed by the board – the
cable must go via slot between wood supports in upper left corner of place for “Key Assigner“ board (pic. 2.3-6,
2.3-7).
Pic. 2.3
Pic. 2.3
Pic. 2.3
Pic. 2.3----6
66
6
Pic. 2.3
Pic. 2.3
Pic. 2.3
Pic. 2.3----7
77
7
e) Fit “Key Assigner“ board back to bottom part of the instrument with previously removed screws (pic. 2.3-8).
Pic. 2.3
Pic. 2.3
Pic. 2.3
Pic. 2.3----8
88
8
2.4
2.4
2.4
2.4
INTERFACE BOARD
INTERFACE BOARD
INTERFACE BOARD
INTERFACE BOARD INSTAL
INSTAL
INSTAL
INSTALLATION
LATION
LATION
LATION
a) Cleanse (degrease) the part of rear panel inside of instrument to place there the interface board (pic. 2.4-1).
b) Remove the protective foil form the self-adhesive supports of the interface board (pic. 2.4-2).