TR2-KBD
MIDI Interface for Korg Trident Keyboard
Model 8-436 ver. 1.0
Copyright © 2018 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
10
Pic. 2.4
Pic. 2.4
Pic. 2.4
Pic. 2.4----1
11
1
Pic. 2.4
Pic. 2.4
Pic. 2.4
Pic. 2.4----2
22
2
c) Apply the interface board to the part of the instrument’s panel so that connectors are on right side (pic. 2.4.-
3). Than fix the self-adhesive supports by pressing down.
d) Put two-pin connector of MIDI cable (X1 connector – see pic. 2) to plug on the interface’s board. Orientation
of the connector is unambiguously given by the connector locks (pic. 2.4-4).
Pic. 2.4
Pic. 2.4
Pic. 2.4
Pic. 2.4----3
33
3
Pic. 2.4
Pic. 2.4
Pic. 2.4
Pic. 2.4----4
44
4
Pic.
Pic.
Pic.
Pic. 2.4
2.4
2.4
2.4----5
55
5
e) Put the 14-pin connector of flat cable (X2 connector
– see pic. 2) to plug on the interface’s board.
Orientation of the connector is unambiguously given
by the connector lock (pic. 2.4-5).