
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
P6
P6
P6
P6----M
M
M
M Owner‘s
Owner‘s
Owner‘s
Owner‘s Manual
Manual
Manual
Manual
8
88
8----427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
30
30
30
30
6.6
6.6
6.6
6.6 TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
MIDI bus :
fully according to MIDI Manufacturers Association standards
MIDI connectors :
2x DIN 41524 (5 pins / 180°)
Transit data delay MIDI IN
Æ
THRU :
max. 1 ms, typ. 0,32 ms
Power supply voltage :
±5 V from instrument's power supply unit
Power current consumption:
max. 50 mA from +5V / max. 5 mA from –5V
Electrical design :
conforms to product specification ČSN EN 60335-1+A55,
ČSN EN 60335-2-45, IEC 60065
EMC :
conforms to product specification EN 55013, EN55020
Operating environment :
standard indoor
Range of operating temperature :
+5°C to +40°C
Relative environmental humidity :
up to 85 %
Board dimensions :
80 x 60 mm
6.7
6.7
6.7
6.7 WARRANTY CONDIT
WARRANTY CONDIT
WARRANTY CONDIT
WARRANTY CONDITIONS
IONS
IONS
IONS
The equipment is provided with thirty
thirty
thirty
thirty----months warranty
months warranty
months warranty
months warranty starting from the date of the equipment take-over by
the customer. This date must be specified on warranty list together with dealer's confirmation.
During this period of time, all defects of equipment or its accessories, caused by defective material or faulty
manufacturing, will be removed free of charge.
Warranty repair is asserted by the customer against the dealer.
Warranty period is to be extended for the time period, during which the product was under the warranty
repair.
The relevant legal regulations take effect in case of cancellation of purchase contract.
The customer will lose the right for free warranty repair, if he will not be able to submit properly filled out
warranty list or if the defects of the product had been caused by:
- unavoidable event (natural disaster),
- connecting the device to the incorrect supply voltage,
- inputs or outputs overloading by connecting the signals source or load source with not-corresponding
characteristics etc.,
- faulty equipment operation, which is at variance with the instructions referred-to in the operating manual,
- mechanical damage caused by consumer during transportation or usage of equipment,
- unprofessional interference with the equipment or by equipment modification without manufacturer’s
approval.
Summary of Contents for 8-427
Page 32: ......