CHD Elektroservis TPE-1, Owner'S Manual, Page: 18 / 24

Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor & Controller & Controller & Controller & Controller
Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual
Model TPE Model TPE Model TPE Model TPE----1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00
Copyright © 2018 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
18
18 18
18
7 77 7 TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION
Dimensions (W/H/D):
145 mm / 48 mm / 90 mm
Weight: 4
6
0 g
Power supply unit: External, standard “barrel“ axial connector 5,5 / 2,1 mm
+ pole on inner pin
Supply voltage: 8 to 15 V
DC
, need not be stabilized
Current consumption: 250 mA max
MIDI buses: fully according to MIDI Manufacturer Association standards
MIDI connectors: 4x DIN 41524 (5 pins / 180°)
Electrical design : under the regulations of the Č SN EN 60335-1+A55,
Č SN EN 60335-2-45, IEC 60065
EMC : under the regulations of the EN 55014, EN 55013, EN 55020
Operating environment : standard indoor
Range of operating temperature : +10 to +35 °C
Relative environmental humidity : up to 85 %
8
88
8 WARRANTY CONDITIONS
WARRANTY CONDITIONS WARRANTY CONDITIONS
WARRANTY CONDITIONS
The equipment is provided with thirty
thirty thirty thirty----months warranty months warranty months warranty months warranty starting from the date of the equipment take-over by
the customer. This date must be specified on warranty list together with dealer's confirmation.
During this period of time, all defects of equipment or its accessories, caused by defective material or faulty
manufacturing, will be removed free of charge.
Warranty repair is asserted by the customer against the dealer.
Warranty period is to be extended for the time period, during which the product was under the warranty
repair.
The relevant legal regulations take effect in case of cancellation of purchase contract.
The customer will lose the right for free warranty repair, if he/she will not be able to submit properly filled out
warranty list or if the defects of the product had been caused by:
•
unavoidable event (natural disaster),
•
connecting the device to the incorrect supply voltage,
•
inputs or outputs overloading by connecting the signals source or load source with not-corresponding
characteristics etc.,
•
faulty equipment operation, which is at variance with the instructions referred-to in the operating manual,
•
mechanical damage caused by consumer during transportation or usage of equipment,
•
unprofessional interference with the equipment or by equipment modification without manufacturer’s
approval.