Getting Started with i50
9
2 Getting Started with i50
2.1
About the Receiver
The i50 GNSS receiver incorporates a GNSS engine, GNSS antenna, internal radio (410
MHz – 470 MHz), 4G cellular modem, Bluetooth, Wi-Fi, and dual-battery in a
ruggedized and miniature unit that is easy for you to set up an all-in-one RTK rover or
mobile base station. Bluetooth and Wi-Fi technology provide cable-free
communication between the receiver and controller.
The receiver can be used as the part of a RTK GNSS system with CHC LandStar 7
software. And you can download the GNSS data that recorded in the internal memory
of receiver to a computer.
To configure the receiver for performing a wide variety of functions, you can use the
web interface by connecting the receiver with PC or smartphone through Wi-Fi.
2.2
Parts of the Receiver
The operating controls are all located on the front panel. Battery compartment and
SIM card slot are on the backside. Serial ports and connectors are located on the
bottom of the unit.
2.2.1
Front Panel
The following figure shows a front view of the receiver.
The front panel contains six indicator LEDs and two buttons.
Front panel
