English
39 - 119
3.
Place the contact tips on the terminals of the component
or circuit to be measured;
The measured resistance is displayed on screen.
3.1.3
Continuity test with buzzer
Attention
: all continuity measurements must be made in the
absence of any voltage
To test electrical continuity, proceed as follows:
1.
Set the switch to
;
2.
Press
. The
symbol is displayed ;
3.
Connect the black lead to the
COM
terminal and the red
lead to «
+
».
4.
Place the contact tips on the terminals of the component
or circuit to be tested ;
The buzzer indicates continuity; the measured resistance is
displayed on screen.
3.1.4
Diode test
Attention
: all diode test measurements must be made in a
power-off condition.
To test a diode, proceed as follows:
1.
Set the switch to
;
2.
Press
twice. The
symbol is displayed ;
