Chauvin Arnoux AEMC Instruments 2135.01 User Manual Download Page 7

Page: 7 / 69

Please

read

and

comply

•

of protection of this equipment may be compromised if used in a manner

• Safety is the responsibility of the operator.

• All metal objects or wires connected to the electrical system should be

assumed to be lethal until tested. Grounding systems are no exception.

•

surement category.

•

• Do not use the instrument or its accessories if they appear damaged.

•

greater than or equal to those of the instrument (CAT IV 50V). Use only

•

• Check that no terminal is connected and the switch is set to OFF before

• Use only the charging unit supplied with the instrument to recharge the

battery.

•

to decide whether to continue or postpone measurements in these
situations.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for AEMC Instruments 2135.01






































































Search results

Summary of Contents for AEMC Instruments 2135.01

Reviews:

Brands by name

Popular brands

Chauvin Arnoux AEMC Instruments 2135.01, User Manual

Search results

Summary of Contents for AEMC Instruments 2135.01

Reviews:

Brands by name

Popular brands