Chauvin Arnoux AEMC Instruments 2135.01, User Manual

Page: 47 / 69

•
• Press the MEM button to display the dEL screen. By default, the blinking word
NO appears on the screen, indicating the test is not to be deleted. To delete
NO to YES , then press and
hold down (>2s) the MEM button. To exit without erasing, perform a short press
on the MEM button.
Note that if the test stored in this Object/Test number is a sweep test (which con
deletes a single measurement. The remaining sweep measurements will still be
memory, as instructed in Section 7.3.1.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com