Mounting
O R I E N T A T I O N
This fixture may be mounted in any position provided there is adequate room for ventilation.
R I G G I N G
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
x
When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
x
Safety cables should always be used.
Note!
Clamp is sold separatel
x
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
y.
4. O
PERATING
I
NSTRUCTIONS
1)
Use the gobo speed knob to adjust the speed of the rotation of the gobo (turning the knob
clockwise increases the speed; counter-clockwise decreases the speed).
2)
Use the gobo rotation switch to set the direction of rotation (up = clockwise rotation, middle = no
rotation, down = counter-clockwise rotation).
3)
Turn the focusing lens to focus the beam onto your projection surface.
SX Gobo Manual
9
2006-12-11/15:16
